DE-CIX access
Short internet paths
Dual power supply
Spare cooling unit (N+1)
TÜV Saarland
DIN EN 50600, class 3
100% green power
Efficient design (PUE ≤ 1.3)
Two packages
1 RU or 25 RU.
Your choice.
You only choose the size: 1 rack unit (RU) for one server, or half a server cabinet (rack) with 25 RU for a whole environment.
We bill power separately by consumption – you only pay for what you actually use.
Your IT team keeps full control of your servers; we take care of space, power, cooling and connectivity.
Housing 1 RU
from €59
per month
For single servers
maincubes FRA1
- Space for one slim server (1 rack unit)
- Power billed by use: €0.40/kWh
- Internet access protected against overload attacks (DDoS)
- Access after online sign-up
- Available immediately
Technical details
- 1 rack unit in shared space
- Uplink: 1 Gbit/s
- Traffic: 15 TB included
- 1× IPv4 included
- Power: A and B feed
Shared Rack 25 RU
from €699
per month
For whole setups, not single servers
maincubes FRA1
- Half a rack (25 rack units)
- Power billed by use: €0.40/kWh
- Internet access protected against overload attacks (DDoS)
- Access by key card, PIN and vein scan
- Limited availability
Technical details
- 25 rack units in a shared rack
- Power allocation: 1.5 kW
- Uplinks: 2× 10 Gbit/s (LACP)
- Traffic: 50 TB included
- 10 IPv4 addresses included
- 3× 16 A (230 V), A and B feed
- Carrier-neutral: bring your own carrier
All prices plus VAT · power billed by consumption · rack dimensions 800 × 1000 mm (W × D)
Larger configurations
More rack units, more power or a rack of your own
Up to 40 kW per rack is possible in FRA1. Tell us which hardware you want to house and how much power it draws – we will plan the space to fit your environment.
We state the setup fee and the minimum term in your quote.
Why colocation?
Infrastructure you do not have to build yourself
No more server room of your own
Air conditioning, an uninterruptible power supply (UPS), fire safety approval, access logs and on-call duty at night and on weekends are no longer your concern. Instead of many separate cost items that are hard to allocate in your accounts, you pay one monthly rate.
A level of protection no office building reaches
Air-sampling smoke detectors for early fire detection, an automatic gas extinguishing system, entry locks that let one person through at a time, and security staff around the clock. You simply cannot get this tested level of protection in your own building – and if something goes wrong, it is exactly what counts.
Green power with proof
The site runs on green power only, is ÖkoPLUS-certified and cools efficiently with outside air (KyotoCooling). The facility is designed so that for every 1 kWh used by the servers, at most 0.3 kWh goes to cooling and building systems (design PUE ≤ 1.3). Figures you can use in your own sustainability report.
A personal point of contact
You always speak to the person who looks after your space and knows your hardware. Write to us briefly about what you need – we reply personally, by phone if you prefer.
Easy to get started
In the rack in 3 steps
From the first conversation to installed hardware – we settle space, power and connectivity together before your server leaves the building.
Clarify needs
How many rack units, what power draw, what connection? We go through your hardware and tell you which package fits – and when one would be too small.
Set up space and access
You receive the quote, the contract and your network details (IP addresses). At the same time, we set up your access authorization for FRA1 – including a site visit before you sign, if you wish.
Install and go live
Hardware into the rack, power and network connected, IP addresses handed over. After that, your system is up and running – and you know who to turn to if something does come up.
Common questions
Your questions. Our answers.
What is colocation – and when is it worth more than a rented server?
With colocation the hardware is yours, and the data center provides space, power, cooling and connectivity. That pays off as soon as you already own hardware or want to buy it for a specific purpose – for instance because of particular processor, storage or licensing requirements. A rented server (in German) is the simpler route if you would rather not deal with hardware at all.
What will power actually cost me in the end?
You pay €0.40 excluding VAT per kilowatt-hour used, on top of the base price – no flat rate that has you paying for someone else’s consumption. The math is simple: power draw in watts × 730 hours ÷ 1,000 × €0.40. An efficient 1-RU server drawing 50 W comes to around €14.60 per month, a typical one at 100 W to around €29.20. The 1.5 kW on the Shared Rack is allocated capacity – you are billed for your actual consumption.
What requirements must my hardware meet?
Generally, 19-inch equipment with matching mounting rails. The racks measure 800×1000 mm (W×D); we confirm mounting depth and rack units with you beforehand. For the two separate power feeds (A and B feed), we recommend servers with two power supplies. Just send us your server’s data sheet – we will tell you before you order whether it fits.
How do I get to my own hardware?
This is the clearest difference between the two packages. With Housing 1 RU, access is granted after online registration. With Shared Rack 25 RU you receive your own access authorization with key card, PIN and vein scan. In both cases the data center is staffed with security personnel around the clock.
Can I get additional IPv4 addresses?
Housing 1 RU includes one IPv4 address, Shared Rack 25 RU includes ten. If that is not enough, we will provide more addresses – just tell us how many you need and what for, and we will state the price in your quote.
What happens in a power outage or a fire?
The power supply at FRA1 is fully duplicated (2N), and cooling has one spare unit (N+1). For fire protection, the data center uses air-sampling smoke detectors for early detection and an automatic gas extinguishing system. The design has been tested by TÜV Saarland to DIN EN 50600 availability class 3.
Can I visit the data center beforehand?
Yes, of course. With the Shared Rack in particular, we strongly recommend it: you see the space, the access route and the connectivity before you sign. Just get in touch and we will arrange a date.
Can I move to more space later on?
Yes. The path from Housing 1 RU to Shared Rack 25 RU and on to a rack of your own is open at FRA1 – the site offers up to 40 kW per rack. Let us know early if growth is on the horizon, and we will plan the space for it from the start.
What is a data center, and what does Tier 3 mean?
A data center is a building constructed to run servers: a dual uninterruptible power supply (UPS), cooling, early fire detection with air-sampling smoke detectors and an automatic gas extinguishing system, access control with key card, PIN and vein scan, and several network connections. It runs around the clock, with security staff on site.
Tier 3 is a rating by the Uptime Institute for a site that can be maintained while it keeps running: power and cooling each have a second path, so maintenance takes place without shutting servers down. The maincubes FRA1 data center is not rated by the Uptime Institute; instead, TÜV Saarland has tested it to the European standard DIN EN 50600 in availability class 3, which requires the same: repairs while operations continue. That is why colocation there is more reliable than a server room in the office.
Tell us what goes into the rack.
Whether it is a single rack unit or half a rack: send us the manufacturer, model and power draw of your hardware – or simply the data sheet. You will get a concrete quote within 24 hours, covering package, base price and estimated power costs.